Wireless at the door: no cabling, hubs or power supplies

Every Ojmar locker lock we supply is wireless at the door. There are no power supplies, backup power supplies or cabling to install, and stand-alone locks need no hubs at all. Connected systems such as the OTS 40 (Pulse) link through a compact wireless gateway.

That has practical consequences for everyone involved in a locker project.

For builders and fit-out teams

• No electrical works for the lockers
• Fewer trades on site
• No coordination of cable routes through joinery
• Simpler programme and lower cost

For joiners and locker makers

Lockers can be built and finished in the workshop, then fitted with locks on site without electricians. We help with door preparation details before production.

For facility owners

Lockers can be added to, moved or reconfigured later. A change room or staff area can be rearranged without rewiring anything.

For upgrades

Because Ojmar locks are self-contained at the door, we can usually replace keyed, mechanical or older electronic locks on existing lockers with no new doors, cabling or electrical works. That includes moving from keys to codes, from codes to RFID cards, or to smartphone access.

It is also why the swap from earlier Ojmar OCS keypad locks to the OCS 30 is so straightforward: the new lock has the same footprint and goes onto the same doors.

Power, without wiring

Battery-powered Ojmar locks run for years on standard batteries, and the OTS 20 Batteryless and OTS 40 Batteryless are human-powered, generating their own energy as the locker is closed.

Talk to us

For builders, architects and joiners, we can review locker schedules and drawings. Call Locksmart Australia on 0417 774 488, email [email protected] or contact us.