OCS 30 (Smart): a touch keypad that also opens by phone

The Ojmar OCS 30 (Smart) is Ojmar's current keypad locker lock. It replaces the earlier OCS Pro and OCS Smart, in handle and no-handle versions, with a sleek new design and a choice of keypad, smartphone or both.

Keypad, phone or both

Users can open their locker with a code on the flat touch keypad, with their phone over Bluetooth, or either. Codes can be 4, 5 or 6 digits. A red, amber and green light shows the locker's status at a glance.

Ways to run your lockers

  • Free mode for day use: any locker can be taken with a code
  • Fixed mode for lockers assigned to one person
  • Rental mode for paid lockers, set per lock in 15-minute intervals
  • Automatic opening at set times, so day-use lockers are free again the next morning

For facility teams

  • Up to 5 years on 4 AA batteries, with a low-battery warning
  • Keeps its configuration through a battery change
  • Front-side emergency power if a battery runs flat
  • User app, Management & Service app and SDK

Built to last

The OCS 30 is rated IP55 and IK9. The electronics, batteries and locking mechanism sit inside the locker, and the flat keypad wipes clean quickly between users. It comes in graphite, silver or white and suits laminate, HPL, melamine, glass and metal doors up to 24 mm, with one version for left and right opening doors.

Where it suits

  • Gyms and fitness clubs
  • Hybrid offices and staff lockers
  • End-of-trip facilities
  • Day spas and wellness centres

Already have earlier OCS locks?

The OCS 30 has the same footprint as earlier Ojmar OCS keypad locks, so it swaps straight onto the existing doors. See our posts on the OCS to OCS 30 swap-over for how it works.

Talk to us

Brochures, the datasheet and the installation guide are on the OCS 30 (Smart) page. Call Locksmart Australia on 0417 774 488, email [email protected] or send us a message.

Previous
Previous

From keys to codes: retrofitting camlocks on existing furniture and lockers

Next
Next

OCS to OCS 30: a same-footprint swap-over for earlier Ojmar keypad locks